@article { author = {سالاری, محمود and کاظمی, حمید and دوستدار, محمدمهدی}, title = {Hydrodynamic Analysis of Stepped Planning Vessels - Sensitivity Analysis of Loading Condition to Air Breathing of Transvers Steps}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {1-12}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {Main difference between planning vessels, conventional displacement, and semi-displacement marine vessels is in their utilization hydrodynamic loads in addition to buoyancy force. The hydrodynamic pressure field on the bottom surface of planning vessels decreases the vessel draught and the thereafter their resistance. The resistance reduction introduces achieving higher speeds. One of the methods for improving hydrodynamic efficiency of planning vessels is utilization of transverse steps under their bottoms. Selecting their locations and heights has high sensitivity to loading conditions, speed, and center of gravity of the vessel. If proper design does not occur, it maybe followed by un-favorite effects. In this research, the flow field over the bottom of two stepped high speed planning vessels at different lading conditions were obtained, using CFD. VOF method was used for capturing the interface between water and air. Simulation was performed for one-step and two-step planning vessels of Cigar. For validating of the simulations, a grid-independency study and some comparisons with experiments are carried out. The emphasis of this study was on identification of the sensitivity of loading conditions on air-breathing of the transverse steps. The results show that the sensitivity is much higher than the traditional non-stepped planning vessels.  }, keywords = {Planning Boat Hydrodynamics,CFD,Transverse Step,Air Breathing of Steps}, title_fa = {تحلیل هیدرودینامیکی شناورهای تندرو با پله های عرضی - تحلیل حساسیت شرایط بارگذاری به هواگیری پله های عرضی}, abstract_fa = {تمایز اساسی بین شناورهای دریایی سرشی و شناورهای متداول جابجایی و شبه جابجایی، بهره گیری از نسبت نیروی هیدرودینامیکی علاوه بر نیروی بویانسی است. میدان فشار هیدرودینامیکی ایجاد شده در کف این شناورها باعث کاهش ارتفاع آبخور شناور و درنتیجه کاهش نیروی مقاومت در آنها می شود. کاهش مقاومت هیدرودینامیکی، دست یابی به سرعت های بالاتر به ازای توان پیشبرنده معین را فراهم می-نماید. یکی از روش های افزایش کارایی سطوح هیدرودینامیکی کف بدنه در شناورهای دریایی سرشی استفاده از پله های عرضی در محل مناسبی از کف بدنه می باشد. طراحی صحیح موقعیت و ارتفاع پله های عرضی متناسب با موقعیت مرکز جرم، شرایط بارگذاری و سرعت، امری مهم و حساس می باشد. این پله ها در صورت عدم تطابق با شرایط فوق الذکر می‌توانند اثرات نامطلوبی بر هیدرودینامیک شناور نیز داشته باشند. در این تحقیق، به کمک دینامیک سیالات عددی میدان و الگوی جریان روی یک شناور تندرو تک پله‌ای و دو پله ای در دوحالت شرایط صحیح کاربری و شرایط بارگذاری نامناسب تحلیل شده است. برای بررسی توزیع دو فاز آب و هوا و مدل سازی اثر سطح آزاد از روش نسبت حجم (VOF) استفاده شده است. این شبیه سازی‌ها برای مدل یک شناور واقعی بنام "کوگار" در دو حالت تک پله ای و با دو پله عرضی انجام گرفته است. برای اطمینان از صحت شبیه سازی ها، بررسی استقلال از شبکه و همچنین معتبرسازی نتایج با مدل آزمایشگاهی انجام گرفته است. تاکید این مقاله بر بررسی وضعیت هواگیری مناسب پشت پله‌های عرضی برای شناورهای سرشی با تک پله عرضی و دو پله‌ای می‌باشد. نتایج نشان می دهند که حساسیت رفتار هیدرودینامیکی شناورهای تندرو پله دار به بارگذاری، سرعت و زاویه تریم بسیار بیشتر از شناورهای بدون پله می باشد.}, keywords_fa = {هیدرودینامیک شناور تندرو,دینامیک سیالات عددی,پله عرضی,هواگیری پشت پله}, url = {https://fma.ihu.ac.ir/article_200296.html}, eprint = {https://fma.ihu.ac.ir/article_200296_007a1a9551059d8746698562c85850d1.pdf} } @article { author = {غلامرضایی, حجت and رئیسی, افراسیاب and قاسمی, بهزاد}, title = {Mixed Convection of a Water-Al2O3 Nanofluid in an Open Square Cavity, Containing a Solid Body Heat Source}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {13-26}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {In this study, mixed convection of a water-Al2O3  nanofluid was numerically investigated in an open square cavity. All cavity walls were insulated and a solid body heat source was placed at the center of the cavity. The nanofluid enters the cavity with uniform velocity and temperature and leaves it as a fully developed flow. The governing equations were discretized using finite volume method and using Patankar’s SIMPLE algorithm. The effects of relevant parameters, such as Reynolds and Richardson numbers, length ratio (The ratio of the heat source length to the length of the cavity), the source thermal conductivity, and solid volume fraction of the nanoparticles were examined, both from flow field and the heat transfer rate considerations. The results show that the average Nusselt number increases with increase in Reynolds and Richardson numbers. A change in length ratio changes the flow and temperature fields. In addition, Increase of heat source thermal conductivity increases the average Nusselt number. The results also show that thermal performance of cavity is enhanced by increasing solid volume fraction of the nanoparticles.  }, keywords = {}, title_fa = {جابجایی ترکیبی نانوسیال آب- اکسید آلومینیوم در یک محفظه مربعی باز حاوی یک قطعه جامد گرمازا}, abstract_fa = {در این تحقیق انتقال حرارت جابجایی ترکیبی نانو سیال آب- اکسید آلومینیوم در یک محفظه مربعی حاوی یک جسم جامد گرمازا به روش عددی بررسی شده است. نانو سیال با دما و سرعت یکنواخت از گوشه ی پایین و سمت چپ محفظه وارد آن می شود و به صورت توسعه یافته از گوشه ی بالا و سمت راست محفظه خارج می شود. جسم جامد قرار گرفته در مرکز محفظه، به صورت یکنواخت انرژی تولید می کند. تمام دیواره های محفظه از نظر حرارتی عایق هستند. معادلات دیفرانسیل حاکم با استفاده از روش حجم محدود گسسته شده‌اند و با استفاده از الگوریتم سیمپل حل شده اند. در این تحقیق اثر پارامترهای مختلف از قبیل کسر حجمی نانوذرات، عدد ریچاردسون، عدد رینولدز، نسبت منظری و ضریب هدایت حرارتی منبع گرمازا بر روی میدان جریان و نرخ انتقال حرارت بررسی شده است. نتایج نشان می دهد که با افزایش اعداد رینولدز و ریچاردسون عدد نوسلت و نرخ انتقال حرارت افزایش می‌یابد. تغییر اندازه‌ی ضلع منبع حرارتی باعث تغییر میدان‌های جریان و میدان دما می‌شود. افزایش ضریب هدایت حرارتی منبع حرارتی باعث افزایش میزان انتقال حرارت از منبع گرمازا به نانوسیال مجاور آن می‌شود. همچنین با افزایش کسر حجمی نانوذرات ، میزان انتقال حرارت زیاد می شود.}, keywords_fa = {جابجایی ترکیبی,محفظه,نانو سیال,تولید حرارت,جسم جامد}, url = {https://fma.ihu.ac.ir/article_200297.html}, eprint = {https://fma.ihu.ac.ir/article_200297_bf96fb31bc3f250f65178773d7202280.pdf} } @article { author = {شجاعی فرد, محمدحسن and خرم پناهی, امین and خیرخواه وطن, مجتبی}, title = {Experimental and Numerical Investigations of Oscillation Parameters Effects on Stability Derivatives of a NACA0012 Airfoil}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {27-38}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {In this article, a comprehensive procedure is proposed to calculate the stability derivatives of a NACA0012 airfoil by means of wind tunnel test and computational fluid dynamics (CFD). To accomplish maneuverability study and dynamic analysis of the flight vehicle, these derivatives were obtained finding the body aerodynamic responses to some specified time variant motions. Here, on the basis of linearized equations of motion, in which the aerodynamic coefficients appear explicitly, two distinct oscillating maneuvers were considered: plunging and fish-like oscillating motion. To obtain the aerodynamic responses of the moving airfoil, a CFD method based on Reynolds Averaged Navier–Stokes (RANS) equations was used with dynamic mesh technique to simulate the specified maneuvers. The computational results were then validated comparing the wind tunnel tests data of the plunging maneuver. Afterwards, the aerodynamic coefficients were calculated using the resulting loads. Finally, the effects of oscillating motion parameters variations on these coefficients are investigated, which shows that dimensionless coefficients are dependent on the oscillations amplitude and frequency. However, they are independent of the Strouhal number in the studied range.}, keywords = {Stability Coefficients,Plunging Motion,Pure-Pitch Motion,Unsteady Oscillating Flow,Strouhal Number}, title_fa = {مطالعه تجربی و عددی اثر پارامترهای نوسانی روی مشتقات پایداری دینامیکی ایرفویل NACA0012}, abstract_fa = {در این مقاله سعی شده است تا اثر پارامترهای نوسانی روی هر یک از مشتقات پایداری دینامیکی یک جسم پرنده دو‌بعدی به صورت های تجربی و عددی بررسی شود. به منظور تخمین مشتقات پایداری دینامیکی لازم است پاسخ آیرودینامیکی جسم به یک مانور مشخص به‌دست آید. در این تحقیق معادلات حرکت جسم به گونه ای بازنویسی شده که بتوان هر یک از مشتقات پایداری را به صورت جدا از هم در معادلات مشاهده و مانور مناسب را به منظور تعیین آن مشتق پیشنهاد داد. با توجه به معادلات حرکت، با ایجاد دو مانور پلانجینگ و پیچش خالص می توان تمامی مشتقات پایداری موجود در معادله حرکت جسم در فضای دوبعدی را به دست آورد. در ادامه، ایتدا مشتقات پایداری یک ایرفویل با انجام آزمایش برای چند حالت با فرکانس و دامنه‌های نوسان مختلف با مانور پلانجینگ به دست آمده است. پس از اعتبارسنجی حل عددی، مشتقات پایداری ایرفویل برای حالت های دیگر مانور پلانجینگ و نیز مانور پیچش خالص، محاسبه شدند. بررسی مشتقات پایداری در فرکانس‌ها و دامنه‌های نوسان مختلف نشان داد که اگر چه مشتقات پایداری می توانند تابعی از فرکانس و دامنه نوسان باشد، اما به‌ازای محدوده مورد مطالعه عدد استروهال تغییر محسوسی ندارد.}, keywords_fa = {مشتقات پایداری,مانور پلانجینگ,مانور پیچش خالص,جریان نوسانی غیردائم,عدد استروهال}, url = {https://fma.ihu.ac.ir/article_200298.html}, eprint = {https://fma.ihu.ac.ir/article_200298_39451abddb1eeaeb3217959d3a156152.pdf} } @article { author = {tavakoli saboor, ali and javareshkian, mohammad hasan and bagheri, amir}, title = {Hypersonic Vehicle Investigations at High Altitudes, Enhancement of Aerodynamic Efficiency}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {39-52}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {In this work, the problem of designing a hypersonic vehicle with high lift-drag ratio in hypersonic rarefied regimes is investigated. At high altitudes, the assumption of continuity employed in the Navier Stocks equations is no longer true and is not possible to simulate the problem with conventional CFD routines. The Direct Simulation of Monte Carlo (DSMC) which is a particle-based method was employed to simulate the hypersonic rarefied regimes of hypersonic vehicles. In the first step, based on momentum theory, a simple definition for increasing aerodynamic efficiency was provided. According to this definition, a two-dimensional body under considerations of hypersonic-rarefied flow regimes was analyzed using the DSMC code of DS2V. According to the facts obtained from this analysis, we considered a typical three-dimensional body, and developed the configurations of high aerodynamic efficiencies. The simulations were conducted in three-dimensional space by the DSMC program of DS3V showed that the abovementioned definition is applicable to three-dimensional geometries. Finally, based on authenticated definitions, we exemplified a three-dimensional body, which is capable to produce high aerodynamic efficiencies in hypersonic regimes at high altitudes.}, keywords = {DSMC Method,Knudsen Number,Hypersonic Regime}, title_fa = {بررسی پرتابه های ابرصوتی در ارتفاعات بالا، به منظور افزایش راندمان آیرودینامیکی}, abstract_fa = {در این تحقیق، یک پرتابه که توانایی ایجاد راندمان آیرودینامیکی بالا در شرایط پروازی ابرصوتی را دارد، توسط یک روش عددی مورد بررسی قرار گرفته است. در این شبیه سازی، از روش مستقیم مونت کارلو DSMC که روشی ذره- مبنا برای شبیه سازی جریان‌های گازی غیرتعادلی می‌باشد، استفاده شده است. به منظور افزایش نسبت برا به پسا، ابتدا" از یک تعریف ساده برگرفته شده از تئوری مومنتم استفاده شده است. بر اساس تعریف فوق، جریان رقیق و ابرصوتی توسط کد محاسباتی DS2V (مربوط به روش شبیه سازی مستقیم مونت کارلو) روی یک جسم دو بعدی شبیه سازی شده، تا موثر بودن تعریف فوق در افزایش بازده آیرودینامیکی برای هندسه بالواره مفروض روشن شود. سپس، با داشتن یک هندسه مرجع سه بعدی به عنوان پرتابه، اقدام به شبیه‌سازی جریان در شرایط حاکم بر جریان‌های رقیق و ابرصوتی توسط نرم افزار عددی جریان رقیق DS3V شده است. در انتها، با تعمیم تعریف فوق الذکر روی هندسه سه بعدی مرجع، یک طرح نمونه که در آن شاهد افزایش بازده آیرودینامیکی باشد، ارائه شده است. نتایج شبیه‌سازی نشان می دهد که در این نمونه، به ازای زوایای حمله کوچک (صفر الی پانزده درجه) مقدار بازده آیرودینامیکی را در هندسه دو‌بعدی نهایی بین 1 الی 4/2 واحد و در حالت سه بعدی، نیز این مقدار را در حدود 1/0 الی 4/0 افزایش داده است.}, keywords_fa = {روش DSMC,عدد نودسن,جریان ابرصوتی}, url = {https://fma.ihu.ac.ir/article_200299.html}, eprint = {https://fma.ihu.ac.ir/article_200299_27d2ff39c60ebe6f39209a891f0707f4.pdf} } @article { author = {dehghani rayni, abbas and ganjali nasab, abdolreza}, title = {Numerical Simulation of Forced Convection Duct Flow of a Radiating Gas with Separation}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {53-66}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {In this paper, a numerical study of a 2-D combined convection-radiation heat transfer in a horizontal rectangular duct with two sudden contractions is presented. Contractions in duct are created by two inclined forward facing steps. To simulate the incline surfaces of the FFS, the blocked- off method was employed for both fluid mechanic and radiation problems. The fluid was treated as a gray, absorbing, emitting and scattering medium. To solve the governing equations, the 2-D Cartesian coordinate system was used. These equations were solved numerically, using the CFD techniques and SIMPLE algorithm. For computation of radiative term in energy equation, the radiative transfer equation (RTE) was solved numerically by discrete ordinates method (DOM) to find the divergence of radiative heat flux distribution. The effects of optical thickness, radiation-conduction parameter and albedo coefficient on heat transfer behavior of the system were carried out. Comparison of numerical results with available credential data shows good consistency.}, keywords = {Sudden Contraction,Forward Facing Step,Radiation Heat Transfer,Blocked - off Method,Discrete Ordinate Method}, title_fa = {شبیه سازی عددی پدیده جابجایی اجباری گازهای تابشی داخل یک کانال همراه با جدایش}, abstract_fa = {در مطالعه حاضر آنالیز عددی و دو بعدی جریان جابه‌جایی اجباری آرام سیال بر روی دو پله‌ شیب دار با انقباض در داخل کانال‌های با مقطع مستطیلی و با در نظر گرفتن اثرات تابشی گاز مورد بررسی قرار گرفته است. دلیل انتخاب این هندسه کاربرد بسیار زیاد آنها در صنعت و به خصوص استفاده از آنها در اتصال کانال هایی با سطح مقطع متفاوت بهم دیگر می باشد. سیال عامل، همانند یک محیط خاکستری در جذب، صدور و پخش تشعشع شرکت می کند. جهت به‌دست آوردن میدان‌های سرعت و دما معادلات مومنتوم و انرژی به صورت عددی حل می‌شوند. فرم جداسازی شده‌ معادلات حاکم، توسط روش حجم محدود به دست آمده و با به کار بردن الگوریتم سیمپل حل می‌شوند. برای شبیه‌سازی جریان روی پله داخل کانال، از روش مسدود شده در سیستم مختصات کارتزین دو بعدی استفاده شده است. از آنجایی که گاز به عنوان یک محیط شرکت کننده در انتقال حرارت تشعشعی نقش دارد، تمام مکانیزم‌های انتقال حرارت که شامل جابه‌جایی، هدایت و تشعشع بوده به طور هم زمان در جریان گاز درنظر گرفته می‌شوند.}, keywords_fa = {انقباض ناگهانی,کانال با پله پیشرونده,انتقال حرارت تشعشعی,روش مسدود‌‌شده,روش طول‌های مجزا}, url = {https://fma.ihu.ac.ir/article_200300.html}, eprint = {https://fma.ihu.ac.ir/article_200300_4b8090597459855c1621fd3c0797a2e2.pdf} } @article { author = {shateri, alireza and zarei kordshooli, mohammad mehdi and zarei, vahid}, title = {Calculation of the Viscosity of Nanofluid Water SPC Model in Molecular Dynamics}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {1}, pages = {67-78}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {This paper presents molecular dynamics modeling for calculating viscosity of nanofluids containing copper nanoparticles. In the first case, the copper nanoparticles were located as a spherical region in water-based fluid module SPC. System under specified boundary conditions, and writing code by LAMMPS software, and nanofluid ratios of 3.2,4.4,6.9 and 9.1 percented by Brownian motion of atoms, was carried out. three popular potential function, LennardJones, Coulomb, and embedded atom method were used. Between equilibrium molecule dynamic, and non- equilibrium molecule dynamic, (EMD) and Green-kubo formula were used to calculate viscosity. The results show that by increasing the amount of voloume fraction, viscosity increases. nanofluids in addition to other factors, such as volume fraction of particles in Brownian motion and clustering phenomenon, each in turn causes changes in viscosity. The simulation results were compared with other's works and found that the obtained results are remarkably accurate.}, keywords = {Pair Potential,Molecular Dynamics,Viscosity,Green-Kubo Equation,Nanofluids,Dynamic Balance,Clustering Phenomenon}, title_fa = {محاسبه ویسکوزیته نانو سیال مدل فرضی SPC آب در دینامیک مولکولی}, abstract_fa = {در این تحقیق از مدل‌ شبیه سازی دینامیک مولکولی برای محاسبه ویسکوزیته نانو سیال حاوی نانو ذرات مس استفاده شده است. در ابتدا، نانو ذرات مس به‌صورت ناحیه کروی بین نانو سیال پایه آب با مدول سه‌گانه SPC قرار گرفته‌اند. سیستم تحت شرایط مرزی تعیین‌شده و کد نویسی در نرم‌افزار لمپس و کسر حجمی های 2/3 و ۴/۴ و 9/6 و 1/9 درصد تحت حرکت براونی اتم ها مورد اجرا قرار گرفته است . سه تابع پتانسیل معروف لنارد جونز، کولمب و روش جاسازی اتمی به‌کار گرفته ‌شده اند. از بین روش‌های دینامیک تعادلی و دینامیک غیرتعادلی، روش دینامیک تعادلی و معادله گرین- کوبو برای محاسبه ویسکوزیته به کار گرفته شده است. نتایج به‌دست‌آمده نشان می‌دهد که به‌طور کلی با اضافه شدن نانو ذرات مس به سیال آب و افزایش درصد کسر حجمی، مقدار ویسکوزیته نیز افزایش می یابد. نانو سیالات علاوه بر کسر حجمی ذرات تابع، عوامل دیگری، نظیر حرکت براونی و پدیده خوشه شدن دارند که هریک به‌نوبه خود باعث تغییراتی در مقدار ویسکوزیته می شود. نتایج شبیه‌سازی باکارهای دیگران و مدل پیش‌بینی خواص ترمودینامیکی مقایسه و مشخص شد که از دقت قابل‌توجهی برخوردارند.}, keywords_fa = {پتانسیل بین‌اتمی,دینامیک مولکولی,ویسکوزیته,معادله گرین- کوبو,نانو سیال,دینامیک تعادلی,پدیده خوشه شدن}, url = {https://fma.ihu.ac.ir/article_200301.html}, eprint = {https://fma.ihu.ac.ir/article_200301_35639cb11df1061f746393158cf68fde.pdf} }