@article { author = {jahangiri, ali and mousavi torshizi, ebrahim}, title = {Local Freezing of Liquid Pipelines, in Order to Provide Repairs}, journal = {Fluid Mechanics & Aerodynamics}, volume = {6}, number = {2}, pages = {71-78}, year = {2017}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {One of the problems in repairing pipelines containing fuels or any other liquid in industrial units or public and residential buildings is impossibility of separating damaged part of the whole path for repair, avoiding waste of fluid. The present design attempts to introduce a method based on use of freezing in pipeline repairs, which, while removing pipe discharge operations locally, recommends it as a superior technique. In this method, by producing cold condition outside the pipe and on both sides of the damaged part, the fluid is frozen in the tube and creates an obstacle in the fluid flow path. The freezing operation is performed by closing a temporary refrigerant coating around the tube. Thus, the damaged part is separated from the rest of the pipeline and is repaired. In this research, the freezing equation was first calculated by numerical solution based on Simpson's integration, and the duration of freezing of the fluid in a tube with different boundary conditions (pipe diameter, type and fluid velocity, etc.) was calculated. At the end, the results of the numerical methods were compared with the results of the experiment on a device designed for this purpose.}, keywords = {Pipelines,Repairs,Freezing,Refrigerant,Liquid Nitrogen}, title_fa = {انجماد موضعی خطوط لوله حاوی مایعات به منظور فراهم کردن امکان تعمیرات}, abstract_fa = {یکی از مشکلات موجود بر سر راه تعمیرات خطوط لوله حاوی سوخت و یا هر نوع مایع دیگری در واحدهای صنعتی و یا تأسیسات ساختمان‌های عمومی و مسکونی، وجود سیال در داخل آن و عدم امکان جدا نمودن بخش آسیب دیده از کل مسیر، جهت تعمیرات و همچنین جلوگیری از اتلاف سیال می‌باشد. طرح حاضر سعی در معرفی روشی مبتنی بر استفاده از انجماد در تعمیرات خطوط لوله را دارد که ضمن حذف عملیات تخلیه لوله در محل، استفاده از آن را به عنوان تکنیک برتر توصیه می‌کند. در این روش با تولید سرما در بیرون لوله و در دو طرف منطقه آسیب دیده، سیال در لوله منجمد شده و مانعی در مسیر جریان سیال به وجود می‌آورد. عمل انجماد با بستن یک پوشش مبرد موقت به دور لوله صورت می‌گیرد. بدین ترتیب محل آسیب دیده از بقیه خط لوله جداشده و تعمیر می‌شود و پس از تعمیرات با برداشتن سیستم خنک‌کن، انجماد از بین رفته و خط لوله مجدداً قابل بهره‌برداری می‌شود. در این تحقیق معادله انجماد ابتدا روش حل عددی مبتنی بر انتگرال‌گیری سیمپسون، حل شده و زمان انجماد سیال در لوله با شرایط مرزی مختلف (قطر لوله، نوع و سرعت سیال و... ) محاسبه گردید. در انتها نتایج دو روش فوق با نتایج به دست آمده از انجام آزمایش، روی دستگاهی که به همین منظور طراحی و ساخته شده، مقایسه گردیده است.}, keywords_fa = {خطوط انتقال,تعمیرات,انجماد,مبرد,ازت مایع}, url = {https://fma.ihu.ac.ir/article_200307.html}, eprint = {https://fma.ihu.ac.ir/article_200307_1c55739caddbb0956456302c2db02d2f.pdf} }