@article { author = {Taghizadeh Valdi, Mohammad hosein and Atrechian, mohammadreza and Jafary Shalkoohy, Ata and Chavoshi, Elham}, title = {Numerical Study of the Effect of Geometric Shape, Holes Distribution, and Drop Height of Projectile on Deepwater Velocity, Using Coupled Eulerian-Lagrangian Method}, journal = {Fluid Mechanics & Aerodynamics}, volume = {8}, number = {1}, pages = {25-42}, year = {2019}, publisher = {Imam Hussein University}, issn = {2322-3278}, eissn = {2980-8111}, doi = {}, abstract = {In this paper, water entry problem of three-dimensional projectiles with various geometrical shapes and different drop heights and holes distribution was numerically simulated by coupled Eulerian-Lagrangian (CEL) method and the effect of mentioned parameters on deepwater velocity and pinch-off time and depth was investigated by the commercial software Abaqus 6.14-2. The numerical results were verified by comparison and proper adaptation with available theoretical and experimental results, such as the movement trajectory of a spherical projectile in water depth, shape of formed air cavity, and pinch-off time and depth, which revealed the accuracy and capability of the numerical algorithm used. The results revealed that pinch-off depth is influenced by projectile geometrical shapes and significantly increases along with increased drop height from free water surface, while the pinch-off time is a very weak function of mentioned parameters. Also, the drag force of water has the highest and lowest effect on flat and pointy-nose projectiles, respectively. Hence, the cubical projectile with the highest velocity depreciation impact on the model bed with a velocity of 1.57m/sec and pinch-off depth occurs at a depth of 63cm, while the conical projectile with the lowest velocity depreciation has an impact velocity of 3.88m/sec and pinch-off depth occurs at a depth of 98cm.}, keywords = {Water Entry,Geometric Shape,Holes Distribution,Drop Height,Coupled Eulerian–Lagrangian Method}, title_fa = {مطالعه عددی اثر شکل هندسی و ارتفاع سقوط پرتابه بر سرعت حرکت در آب به روش کوپل اویلری-لاگرانژی}, abstract_fa = {در این مقاله، با مدل­سازی عددی مسئله ورود به آب پرتابه­های سه بعدی با اشکال هندسی مختلف و ارتفاع سقوط و آرایش سوراخ­های متفاوت به روش کوپل اویلری-لاگرانژی، تاثیر پارامترهای مذکور بر سرعت حرکت پرتابه در عمق آب و زمان و عمق جدایش حباب با استفاده از نرم­افزار تجاری اجزای محدود آباکوس 6/14-2 مورد بررسی قرار گرفت. نتایج حل عددی از مقایسه و تطابق مناسب با نتایج تئوری و آزمایشگاهی موجود شامل مسیر حرکت یک پرتابه کروی در عمق آب، شکل حباب هوای تشکیل شده و زمان و عمق جدایش آن،       صحت­سنجی گردید که بیانگر دقت و کاربرد الگوریتم عددی مورد استفاده بود. نتایج نشان داد که عمق جدایش حباب متاثر از شکل هندسی پرتابه است و با افزایش ارتفاع سقوط آن از سطح آزاد آب، به­طور قابل ملاحظه­ای افزایش می­یابد. در حالی که، زمان جدایش حباب تابع ضعیفی از پارامترهای مذکور می­باشد. همچنین، نیروی پسا بر پرتابه­های با سطح تماس مسطح و تیزگونه، به ترتیب بیشترین و کمترین تاثیر را دارد. از این رو، پرتابه مکعبی که از بیشترین استهلاک سرعت در عمق آب برخوردار است، با سرعت m/s57/1 به بستر مدل برخورد نموده و جدایش حباب در عمق cm63 رخ می­دهد. در حالی که، پرتابه مخروطی با کمترین استهلاک سرعت در عمق آب، دارای سرعت برخورد m/s88/3 است و جدایش حباب در عمق cm98 اتفاق می­افتد.}, keywords_fa = {ورود به آب,شکل هندسی,آرایش سوراخ,ارتفاع سقوط,کوپل اویلری-لاگرانژی}, url = {https://fma.ihu.ac.ir/article_204514.html}, eprint = {https://fma.ihu.ac.ir/article_204514_74c3ef0845c8840e996dbbfb1c5ca084.pdf} }