Nesbitt, B. “Handbook of Valves and Actuators: Valve and Actuators Selection”, Chapter 19, Butterworth-Heinemann, pp.425-432, UK, 2011.
Zhang, P. “Advanced Industrial Control Technology: A Handbook for Engineers and Researchers, Sensors and Actuators for Industrial Control, Chapter 1”, pp.2-186, Elsevier, UK, 2010.
Keller, H., and Isermann, R. “Model-Based Nonlinear Adaptive Control of a Pneumatic Actuator”, Control Eng. Practice, Vol. 1, No. 3, pp. 505-511, 1993.
Sorli, M., Gastaldi, L., Codina, E., and Heras, S. “Dynamic Analysis of Pneumatic Actuators”, Simulation Practice and Theory, No. 7, pp.58-602, 1999.
Sekhavat, P., Sepehri, N., and Wu, Q. “Impact Stabilizing Controller for Hydraulic Actuators with Friction: Theory and Experiments”, Control Engineering Practice, Vol. 14, pp. 1423-1433, 2006.
Oriol, G.B., Campanile, F., Galceran, S.A., Montesinos, D.M. and Rull, J.D. “Hydraulic Actuator Modeling for Optimization of Mechatronic and Adaptronic Systems”, Mechatronics, Vol. 18, No. 10, pp. 634-640, 2008.
Rongjie, K., Zongxia, J., Shaoping, W., and Lisha, C. “Design and Simulation of Electro-hydrostatic Actuator with a Built-in Power Regulator”, Chinese Journal of Aeronautics, Vol. 22, pp. 700-706, 2009.
Marton, S., Fodor, S., and Sepehri, N. “A Practical Method for Friction Identification in Hydraulic Actuators”, Mechatronics, Vol. 21, pp. 350-356, 2011.
Mehmood. A., Laghrouche, S., and Bagdouri, M. “Modeling Identification and Simulation of Pneumatic Actuator for VGT System”, Sensors and Actuators A, Vol. 165, pp. 367–378, 2011.
Yaoxing, S., Hang, Y., Zongxia, J. and Nan, Y. “Matching Design of Hydraulic Load Simulator with Aerocraft Actuator”, Chinese Journal of Aeronautics, Vol. 26, No. 2, pp. 470-480, 2013.
Li, K., Zhong, L., Lu, K., and Ping, Y. “Thermal-Hydraulic Modeling and Simulation of the Hydraulic System, Based on the Electro-Hydrostatic Actuator”, Procedia Engineering, Vol. 80, pp. 272 – 281, 2014.
Harris, P., Nolan, S., Garet E., and Donnell, O., “Energy Optimisation of Pneumatic Actuator Systems in Manufacturing”, Journal of Cleaner Production, Vol. 72, pp. 35-45, 2014.
Liu, B., Hou, Y., Li, D., and Yang, J. “A Thermal Bubble Micro-Actuator with Induction Heating”, Sensors and Actuators A, Vol. 2, No. 2, pp. 8–14, 2015.
Guo, K., Wei, J., Fang, J., Feng, R., and Xiaochen, W. “Position Tracking Control of Electro-Hydraulic Single-Rod Actuator, Based on an Extended Disturbance Observer”, Mechatronics, Vol. 27, pp. 47–56, 2015.
)
