Goswami, A. and Parpia, I. H. “Grid Restructuring
for Moving Boundaries”, The 10th Computational
Fluid Dynamics Conference, Honolulu, HI, USA,
24-26 June, 1991.
2. Giatonde, A.L. and Fiddes, S.P. “A Three-
dimensional Moving Mesh Method for the
Calculation of Unsteady Transonic Flows”,
Aeronautical Journal, Vol. 99, No. 984, pp.150–
160, April 1995.
3. Batina, J.T. “Unsteady Euler Airfoil Solutions,
Using Unstructured Dynamic Mesh”, The 27th
Aerospace Meeting, Reno, Nevada, Jan. 1989.
4. Batina, J.T. “Unsteady Euler Algorithm with
Unstructured Dynamic Mesh for Complex Airfoil
Aerodynamic Analysis”, AIAA Journal, Vol. 29,
No. 3, pp.327–333, 1991.
5. Liu, T., Lin, W., and Hilbert., C.B. “Automatic
High-Order Mesh Movement with Spring-Field and
Vector-Adding: 2D Moving Mesh with Viscous
Layer”, The 23rd AIAA Computational Fluid
Dynamics Conference, Grapevine, Texas, 2017.
6. Hase, J.E., Anderson, D.A., and Parpia, I.H. “A
Delaunay Triangulation Method and Euler Solver
for Bodies in Relative Motion”, The 10th
Computational Fluid Dynamics Conference,
Honolulu, Hawaii, USA, 24–27 June, 1991.
7. Zhang, L.P. and Wang, Z.J. “A Block LU-SGS
Implicit Dual Time-Stepping Algorithm for Hybrid
Dynamic Meshes”, Computer & Fluid, Vol. 33, No.
7, pp. 891-916, 2004.
8. Mirsajedi, S. M., Karimian, S.M.H., and M. Mani,
“A Multi zone Moving Mesh Algorithm for
Simulation of Flow around a Rigid Body with
Arbitrary Motion”, ASME Journal of Fluids
Engineering, Vol. 128, pp. 297-304, March 2006.
9. Mirsajedi, S.M. and Karimian, S. M.H. “Evaluation
of a Two-dimensional Moving-Mesh Method for
Rigid Body Motions”, Aeronautical Journal, Vol.
110, No. 1109, pp. 429-438, July 2006.
88زٚفهّٙا ٔ ٝ ػّٕی-پػٚٞکی ٔىا٘یه ؾیالات ٚ آیطٚزیٙأیه، خّس7ٜ، قٕاض2ٖ، پاییع ٚ ظٔؿتا1397
10. Mirsajedi, S. M. and Karimian, S. M.H. “Unsteady
Flow Calculations with a New Moving-Mesh
Algorithm”, The 44th AIAA Aerospace Sciences
Meeting and Exhibit Conference, pp. 1145-1153,
2006.
11. Steger, J.L., Doughery, F.C., and Beneck, J.A. “A
Chimera Grid Scheme”, ASME Journal, Vol. 5, pp.
59-69, 1983.
12. Zhang, S.J., Liu, J., and Chen, Y.S. “Numerical
Simulation of Stage Separation with an
Unstructured Chimera Grid Method”, The 22nd
Applied Aerodynamics Conference and Exhibit.,
USA, 2004.
13. Togashi, F., Ito, Y., Nakahashi, K., and Obayashi,
S. “Extensions of Overset Unstructured Grids to
Multiple Bodies in Contact”, J. Aircraft, Vol. 43,
No. 1, pp. 52-57, 2006.
14. Liu, J. and Akay, H. “Flow around Moving Bodies,
Using a Dynamic Unstructured Overset-Grid
Method”, Int. J. of Computational Fluid Dynamics,
Vol. 24, No. 6, pp. 187-200, 2010.
15. Razzaghi, M.M. and Mirsajedi, S.M. “A 3-D
Moving Mesh Method for Simulation of Flow
around a Rotational Body”, Journal of Applied
Fluid Mechanics, Vol. 9, No.2, pp. 1023-1034,
2016.
Razzaghi, M.M. and Mirsajedi, S.M. “A Moving
Mesh Method with Defining Deformable Layers”,
Progress in Computational Fluid Dynamics, Vol.
17, No. 2, pp.63–74, 2017.
17. “Test Cases for Inviscid Flow Field Methods”,
AGARD Advisor report No. 211, 1985.
18. “Compendium of Unsteady Aerodynamic
Measurements”, AGARD-R-702, No. 198, 1982.
19. Hoke M.C., Decker R.K., Cummings R.M.,
McDaniel D.R., and Morton S.A. “Comparison of
Overset Grid and Grid Deformation Techniques
Applied to Two-dimensional NACA Airfoils”, The
19th AIAA Computational Fluid Dynamics
Conference, San Antonio, Texas, 22 - 25 June,
2009.
20. Rolland H.E. “CFD Wing/Pylon/Finned Store
Mutual Interference Wind Tunnel Experiment”,
Arnold Engineering Development Center, USA,
1991.
21. Osman, A.A., Bayoumy, A.M., Baialy, I.E.,
Abdellatif, O.E., and Khallil, E.E. “Investigation of
the Effect of Grid Size on External Store Separation
Trajectory, Using CFD”, International Journal of
Mechanical and Mechatronics Engineering, Vol. 9,
No. 4, 2015
)
