1
Department of Mechanical Engineering, Isfahan University of Technology
2
Department of Aerospace Engineering, Imam Hossein University
Abstract
The aim of inverse design problems is achieving a geometry corresponding to the wall target pressure distribution. One of the newest inverse design methods, was Elastic Surface Algorithm (ESA) in which the airfoil wall was modeled as a flexible curved beam and the difference between target and current pressure distributions in each iteration was the deformation factor of the airfoil wall. The first version of ESA used for the inverse design of sharp leading edge blade of axial flow compressors, is subject to oscillation, instability and divergence due to high pressure gradients on the blade leading edge. Therefore, it cannot be used for a sharp leading edge blade. The purpose of this research is to develop ESA for axial-flow compressor cascade with sharp leading edge blades. The main basis of this Improvement is paying attention to the deflection curve of the beam, which is continuous and differentiable in all points. The physical property of Timoshenko’s beam in large deformations is used in the upgraded version without applying any geometric filtration to eliminate the fractures of the intermediate profiles. In order to increase the displacement of the beam at each iteration, an optimal relationship between the beam characteristics including the elasticity modulus, the thickness and width of the beam is used. Finally, the upgraded version has been validated in a few cases for subsonic inviscid flow regime. The results indicate the robustness, flexibility and high convergence rate of the upgraded ESA in the design of axial-flow compressor blades.
Jahangirian, A. and Shahrokhi, A. “Inverse Design of Transonic Airfoils Using Genetic Algorithm and a New Parametric Shape Method”, Inverse Probl. Sci. En., Vol. 17, no. 5, pp. 681-699, 2009.##
Dulikravich, G. and Baker, D. “Aerodynamic Shape Inverse Design Using a Fourier Series Method”, 37th Aerospace Sciences Meeting and Exhibit, 1999.##
Nili Ahmadabadi, M., Durali, M., Hajilouei Benisi, A., and Ghadak, F. “Duct Design In Subsonic And Supersonic Flow Regimes With And Without Normal Shock Waves Using Flexible String Algorithm”, International Journal of Science & Technology, (Transaction B: Mechanical Engineering), Vol. 17, no. 3 pp. 179-193, 2010.##
Madadi, A. “3D-dimensional Ball-spine Algorithm for Determining the Profile of an Axial Flow Compressor with Specified Pressure Distribution”, PHD Thesis, Mechanical Engineering, Amir Kabir University of Technology, 2014 (in persian).##
Nili-Ahmadabadi, M., Hajilouy-Benisi, A., Ghadak, F., and Durali, M. “A Novel 2D Incompressible Viscous Inverse Design Method for Internal Flows Using Flexible String Algorithm”, J. Fluid. Eng., Vol. 132, no. 3, pp. 031401, 2010.##
Nili-Ahmadabadi, M., Durali, M., Hajilouy-Benisi, A., and Ghadak, F. “Inverse Design of 2-D Subsonic Ducts Using Flexible String Algorithm”, Inverse Probl. Sci. En., Vol. 17, no. 8, pp. 1037-1057, 2009.##
Ghadak, F., Nili, M., Dourali, M., and Hajilouy-Benisi, A. “A New Method in Inverse Design, Based on Ball-Spine for Axisymmetric Ducts with Application in Gas Turbines”, Fluid Mechanics And Aerodynamics, Vol. 7, no, 4. pp. 65-75, 2012 (in persian).##
Nili Ahmadabadi, M., Ghadak, F., and Mohammadi, M. “Subsonic and Transonic Airfoil Inverse Design Via Ball-Spine Algorithm”, Computers & Fluids, Vol. 84, pp. 87-96, 2013.##
Madadi, A., Kermani, M. J., and Nili-Ahmadabadi, M. “Aerodynamic Design of S-Shaped Diffusers Using Ball–Spine Inverse Design Method”, J. Eng. Gas Turb. Power, Vol. 136, no. 12, pp. 122606-122606-8, 2014.##
Madadi, A., Kermani, M. J., and Ahmadabadi, M. N. “Applying the Ball-spine Algorithm to the Design of Blunt Leading Edge Airfoils for Axial Flow Compressors”, J. Mech. Sci. Technol., Vol. 28, no. 11, pp. 4517-4526, 2014.##
Madadi, A., Kermani, M. J., and Nili-Ahmadabadi, M. “Application of the Ball-Spine Algorithm to Design Axial-Flow Compressor Blade”, Scientia Iranica, Vol. 21, no. 6, pp. 1981-1992, 2014.##
P. Mayeli, M. Nili-Ahmadabadi, H., and Besharati-Foumani, “Inverse Shape Design for Heat Conduction Problems Via the Ball Spine Algorithm”, Numer. Heat. Tr. A-Appl, Part B: Fundamentals, Vol. 69, no. 3, pp. 249-269, 2016.##
Hesami, H. and Mayeli, P. “Development of the Ball-spine Algorithm for the Shape Optimization of Ducts Containing Nanofluid”, Numer. Heat. Tr., Part A: Applications, Vol. 70, pp. 1371-1389, 2016.##
Safari, M., Nili-Ahmadabadi, M., Ghaei, A., and Shirani, E. “Inverse Design in Subsonic and Transonic External Flow Regimes Using Elastic Surface Algorithm”, Computers & Fluids, Vol. 102, pp. 41-51, 2014.##
Felippa, C. “Nonlinear Finite Element Methods”, (ASEN 6107) DAES, University of Colorado at Boulder, 2012.##
Nasrazadani, S. H., Nili-Ahmadabadi, M., Noorsalehi, M. H., & Ghadak, F. (2020). Inverse Design of Axial Compressor Cascade Blades in Inviscid Subsonic Flow Using Upgraded Elastic Surface Method. Fluid Mechanics & Aerodynamics, 8(2), 43-58.
MLA
Seyed Hossein Nasrazadani; Mahdi Nili-Ahmadabadi; Mohammad Hossein Noorsalehi; Farhad Ghadak. "Inverse Design of Axial Compressor Cascade Blades in Inviscid Subsonic Flow Using Upgraded Elastic Surface Method". Fluid Mechanics & Aerodynamics, 8, 2, 2020, 43-58.
HARVARD
Nasrazadani, S. H., Nili-Ahmadabadi, M., Noorsalehi, M. H., Ghadak, F. (2020). 'Inverse Design of Axial Compressor Cascade Blades in Inviscid Subsonic Flow Using Upgraded Elastic Surface Method', Fluid Mechanics & Aerodynamics, 8(2), pp. 43-58.
VANCOUVER
Nasrazadani, S. H., Nili-Ahmadabadi, M., Noorsalehi, M. H., Ghadak, F. Inverse Design of Axial Compressor Cascade Blades in Inviscid Subsonic Flow Using Upgraded Elastic Surface Method. Fluid Mechanics & Aerodynamics, 2020; 8(2): 43-58.
)
